KitchenAid Blender Coupling / Clutch / Coupler - No spanner provided

KitchenAid Blender Coupling / Clutch / Coupler - No spanner provided

AED 130.00
+ AED 111.00 Air Shipping

  • Includes any applicable VAT and customs duty.
  • Air shipping cost to be recalculated with delivery address at checkout.
  • To be delivered in 6 - 9 * working days.
  • 100% genuine and new product.
  • Credit card / Cash on Delivery
Note:

Overwhelmingly many customers order the wrong spare part that is not compatible to their machine.

If you're not sure about the compatibility, send us photos of the label on your machine like this one below for our verification. It's usually found on the bottom of the machine.


important-note
Summary
Genuine KitchenAid 9704230 coupler. Fitting instructions included. This coupler does not include a spanner
Description
Genuine KitchenAid coupler. Please see other listings for a suitable spanner or screwdriver. There are two main ways to remove the old clutch. First you can use a thin spanner to grip the flats on the spindle under the coupler then turn the coupler clockwise. Second you can use a large flat bladed screwdriver to gently prise the coupler off the spindle. If you use the second method the aluminium thread in the coupler will be stripped as aluminium is softer. This is not a problem as the coupler will need replacing anyway. Just make sure you clean off any pieces of aluminium left in the thread on the spindle. Extreme cold can make it easy to snap off the black lugs on top and extereme heat (such as blending hot soups for many minutes) can make the rubber soft and deform. The coupler on a KitchenAid blender can fail for a number of reasons. It is made from natural rubber which will deteriote over time. It may become brittle and very hard which can cause it to feel more like plastic. The coupler can also break if the food being chopped is too hard or being chopped at too higher speed. The part failing prevents the motor from more severe damage. The coupler/clutch has six rubber teeth which grip the underside of the blade in the blender jug. The clutch is secured to the blender spindle (which is made of steel) with a reverse aluminium thread. i.e. you turn clockwise to undo it which is the opposite to normal.
Images
-
-
-
-
-
-
-
-
-
Reviews

Be the first to review. Login

KitchenAid Blender Coupling / Clutch / Coupler - No spanner provided

AED 130.00
+ AED 111.00 Air Shipping
  • Includes any applicable VAT and customs duty.
  • Air shipping cost to be recalculated with delivery address at checkout.
  • To be delivered in 6 - 9 * working days.
  • 100% genuine and new product.
  • Credit card / Cash on Delivery
Share on: