Trainer drinking bottle, blue, from 4 months, 220 ml, 1 pc

Trainer drinking bottle, blue, from 4 months, 220 ml, 1 pc

AED 63.00
+ AED 46.00 Air Shipping

  • Includes any applicable VAT and customs duty.
  • Air shipping cost to be recalculated with delivery address at checkout.
  • To be delivered in 6 - 9 * working days.
  • 100% genuine and new product.
  • Credit card / Cash on Delivery
Summary

Before first use: Disassemble and clean the product into all its individual parts before first use. Then put the individual parts in boiling water for 5 minutes. This is to ensure hygiene. More detailed information on cleaning can be foundin the appropriate section. Cleaning: Disassemble the product into all individual parts before each further use and clean it in warm soapy water. For hygiene reasons, rinse well with clean water before sterilizing. No cleaning products with harmful ingredients such as alcohol, chlorine and/or microplastics use. Before each use, check all the individual parts of the trainer+ and pull the sucker/drinking beak in all directions. Throw away the product immediately at the first sign of damage or wear. For optimal cleaning, the trainer+ MUST be disassembled into all individual parts. Cleaning in the assembled state can damage the trainer+. Suitable for cleaning in the upper compartment of the dishwasher (at up to 65 °C). Items may be discolored by food. This does not have a negative impact on the material. Clean the mouthpiece of the drinking beak very carefully to avoid damage to the membrane. Do not use abrasive cleaning agents. Use only soft brushes or soft sponges. Hard cleaning brushes can scratch the plastic. Make sure that there are no food residues left in the individual parts of the Trainer+ after cleaning. Sterilizing: For optimal sterilization, the trainer+ must be disassembled into all individual parts. Clean all individual parts of the trainer+ before sterilizing. After cleaning, sterilization can be carried out as follows: steam sterilization (electric or microwave, depending on the manufacturer's instructions), sterilization in boiling water (at least 5 minutes) or in a sterilization solution. Let all the individual parts cool down after boiling or sterilizing. Do not leave parts (including the teat/drinking beak) in the sterilization solution for longer than recommended or expose to direct sun or heat – otherwise the function of the product or the teat/drinking beak could be impaired. The coach NEVER sterilize the assembled state. This can damage the trainer+ and warp the threads with which the trainer+ is screwed together. Inserting the TEAT/DRINKING BEAK: Insert the teat or drinking beak into the screw ring of the Trainer+ until it makes an audible "click". Put the handles on the neck of the trainer+ and turn the suction cup/drinking beak firmly closed with the screw ring. Instructions for heating: NEVER pour boiling water into the trainer+. NEVER heat or cool a locked trainer+. Remove the protective cap and teat/drinking beak (with the screw ring) when heating, especially before heating in a bottle warmer or in the microwave. Do not overheat, as this could damage the trainer+. NEVER put the trainer+ in an oven. When heating in the microwave, proceed with special care. Always check the temperature before feeding. The drinking cup must not be used for hot drinks (above 40 °C). Further important information: Do not use a needle or other pointed objects to enlarge the opening of the sucker/drinking beak. Always store the trainer+ in a dry condition. Only use MAM teats and symmetrical drinking beaks from MAM for the MAM Trainer+. The leakage safety of the drinking cup is affected by carbonated drinks. To avoid injury, do not let the baby walk around with the trainer+. NEVER put the baby to sleep with the trainer+. Prolonged contact with liquids can cause tooth decay. Please keep the notes in a safe place.
Description
The MAM drinking learning bottle Trainer+ 220 ml from 4 months in blue, motif Elefant supports the easy transition from breastfeeding or the bottle to the drinking cup. The practical MAM Trainer+ set contains a drip-free MAM teat, the MAM drinking beak ultra-soft and a MAM Hold My Bottle bottle handle. So your baby can learn to drink independently step-by-step. Step 1: The drip-free MAM teat facilitates the transition from breastfeeding to the bottle or to the trainer+. Thanks to the slot opening, it is drip-free and the baby can control the drinking flow himself. 2. Step: With the drip-free, extra soft drinking beak, the transition from breastfeeding or the bottle to the cup is particularly easy. The drinking beak has no valve, and is drip-free thanks to the slot opening. The trick: The symmetrical teats and drinking beaks from MAM simulate mom's breast while drinking with their natural SkinSoft surface and the flat shape and the particularly soft silicone feel familiar.
Product Safety
ATTENTION to the safety and health of your child! Continuous and prolonged sucking of liquids causes caries. Always check the temperature of the food before feeding. Throw away the product immediately at the first signs of damage or defects. All unused items must be kept out of the reach of children. Never attach any cords, ribbons, laces or parts of clothing to the product. Danger of strangulation! Teats should never be used as a pacifier. This product should only be used under adult supervision.
Product Information
  • EAN :
  • Age recommendation :
Images
-
Reviews

Be the first to review. Login

Trainer drinking bottle, blue, from 4 months, 220 ml, 1 pc

AED 63.00
+ AED 46.00 Air Shipping
  • Includes any applicable VAT and customs duty.
  • Air shipping cost to be recalculated with delivery address at checkout.
  • To be delivered in 6 - 9 * working days.
  • 100% genuine and new product.
  • Credit card / Cash on Delivery
Share on: